Developed specifically for the Ford Transit Custom, Store Van interior lining solutions include 9 mm phenolic-coated plywood floors and aluminium lining solutions, designed to protect the cargo area bodywork even in the most demanding working conditions. Available with provisions for the vehicle’s original lashing points, the floors provide a durable, impact-resistant surface, while the linings for side walls, doors and wheel arches effectively protect the most exposed areas from scratches, dents and abrasions caused by the daily transport of tools, equipment and materials.
In addition to protecting the vehicle interior, the floors and linings provide a robust and reliable foundation for the installation of van racking systems, mobile workshops and load securing equipment, helping to make your Ford Transit Custom safer, more organised and more professional.
Available for this vehicle:
B honeycomb polypropylene panel for the lower section of the rear hinged doors.
C honeycomb polypropylene panel for the upper section of the rear hinged doors.
The following items are available for vehicles with sheet metal side panels.
| VEHICLE | A | B | C |
|---|---|---|---|
| L1 H1 P1 | F22 HPCU10H1A1 01 | F22 HPCUDR00A1 01 | F22 HPCUDRH1A1 01 |
| L1 H1 P2 | F22 HPCU10H1B1 01 | F22 HPCUDR00A1 01 | F22 HPCUDRH1A1 01 |
| L2 H1 P1 | F22 HPCU20H1A1 01 | F22 HPCUDR00A1 01 | F22 HPCUDRH1A1 01 |
| L2 H1 P2 | F22 HPCU20H1B1 01 | F22 HPCUDR00A1 01 | F22 HPCUDRH1A1 01 |
P1 right-hand sliding door / P2 right- and left-hand sliding doors
B aluminium panel for the lower section of the rear hinged doors.
C aluminium panel for the upper section of the rear hinged doors.
The following items are available for vehicles with sheet metal side panels.
| VEHICLE | A | B | C |
|---|---|---|---|
| L1 H1 P1 | F22 APCU10H1A1 00 | F22 APCUDR00A1 00 | F22 APCUDRH1A1 00 |
| L1 H1 P2 | F22 APCU10H1B1 00 | F22 APCUDR00A1 00 | F22 APCUDRH1A1 00 |
| L2 H1 P1 | F22 APCU20H1A1 00 | F22 APCUDR00A1 00 | F22 APCUDRH1A1 00 |
| L2 H1 P2 | F22 APCU20H1B1 00 | F22 APCUDR00A1 00 | F22 APCUDRH1A1 00 |
P1 right-hand sliding door / P2 right- and left-hand sliding doors
F 12 mm phenolic-coated plywood bulkhead panel.
| VEHICLE | D 9 mm | F |
|---|---|---|
| L1 H1P1 | F22 WFCU10D1A1 1S | F22 WFCUWBT1B0 1S |
| L1 H1P3 | F22 WFCU10D1B1 1S | F22 WFCUWBT1B0 1S |
| L2 H1P1 | F22 WFCU20D1A1 1S | F22 WFCUWBT1B0 1S |
| L2 H1P3 | F22 WFCU20D1B1 1S | F22 WFCUWBT1B0 1S |
P1 right-hand sliding door / P3 with and without right- and left-hand sliding doors
NOTE:
D 9 mm phenolic-coated plywood floor, designed to fit the vehicle’s original lashing points and equipped with “Airline” load securing tracks.
⚠️ For improved performance and long-term durability, it is recommended to secure the floor to the vehicle floor using silicone adhesive.
F 12 mm phenolic-coated plywood bulkhead panel.
| VEHICLE | D 9 mm | F |
|---|---|---|
| L1 H1 P1 | F22 SFCU10G1A1 1S | F22 WFCUWBT1B0 1S |
| L1 H1P3 | F22 SFCU10G1B1 1S | F22 WFCUWBT1B0 1S |
| L2 H1P1 | F22 SFCU20G1A1 1S | F22 WFCUWBT1B0 1S |
| L2 H1P3 | F22 SFCU20G1B1 1S | F22 WFCUWBT1B0 1S |
P1 right-hand sliding door / P3 with and without right- and left-hand sliding doors
NOTE:
D 9 mm plywood floor with a 2 mm aluminium checker plate surface and provisions for the vehicle’s original lashing points.
| VEHICLE | D Marine-grade plywood floor | D Aluminium chequer plate surface |
|---|---|---|
| L1 H1P1 | F22 AFCU10B1A1 00 | F22 AFCU10A1A1 00 |
| L1 H1P3 | F22 AFCU10B1B1 00 | F22 AFCU10A1B1 00 |
| L2 H1P1 | F22 AFCU20B1A1 00 | F22 AFCU20A1A1 00 |
| L2 H1P3 | F22 AFCU20B1B1 00 | F22 AFCU20A1B1 00 |
P1 right-hand sliding door / P3 with and without right- and left-hand sliding doors
Fill in the fields below to receive more information. One of our representatives will contact you as soon as possible ( required fields):*
